Publicité
Les langues disponibles
Les langues disponibles
interno_GB
14-09-2004
Problem
The
steam
dispensing
function will not start.
Boiler tank noise while
heating.
The suction power has
died down.
Water leaks from the
brush after liquid suction.
All manuals and user guides at all-guides.com
15:43
Pagina 59
Cause
- There is no water in the
boiler tank.
- The water in the boiler
tank has not yet reached
the correct temperature.
The water is boiling.
- Attachments, the suction
hose or the hard suction
tube is blocked.
- The air outlet filters are
dirty or worn.
- The
water
connection is blocked.
There are liquid residues
in the suction hose or stiff
suction tube.
Remedy
- Add water to the boiler
tank.
- Wait for the temperature
warning light to switch
on.
Proceed as usual; the noise
will stop after a few
seconds.
- Remove anything bloc-
king the pipes or acces-
sories.
- Wash or replace the fil-
ters.
container
- Remove and clean the
connection as described
in section 4.1.
Leave the motor running
for 1 minute after cleaning
up liquids.
59
Publicité
