ARIETE Vapori aspira Mode D'emploi page 50

interno_GB 14-09-2004
3 ATTACHMENTS
3.1 VACUUM CLEANER
Brush (V)
With this brush, which can be fitted to the handle or
to the extension tubes, it is possible to vacuum all
types of dirt on any surface.
This attachment is the only one suitable for use with
the frame (Z) that can be used to clean parquet
floors.
Place the brush on the frame and lock it into place
with the two small side levers on the frame.
WARNING: This brush (V) and frame (Z)
must only be used on dry floors and surfa-
ces.
3.2 VACUUM-STEAM
Multipurpose brush (D)
With this brush, it is possible to vacuum dust and
liquids as well as to dispense steam.
It is recommended for use on large surfaces, cera-
mic floorings, marble, parquet, rugs, etc.
According to the type of surface to be cleaned, fit
the following frames:
- bristled frame (F) – suitable for vacuum cleaning
any type of surface
- wet vacuum frame (H) – suitable for vacuuming
up liquids on smooth surfaces
To fit the different frames on the multipurpose brush
(D), it is sufficient to insert the lock pins on the requi-
red frame into the side holes (E) on the brush and
press until the frame clicks into place.
48
All manuals and user guides at all-guides.com
15:43 Pagina 48