ARIETE Vapori aspira Mode D'emploi page 51

interno_GB 14-09-2004
To release the frame, it is necessary to push inwards
on the lock pins, using both hands, and to push
down at the same time to separate the frame from
the brush.
CAUTION: To avoid the risk of dropping
parts accidentally and damaging them, this
operation should be performed on a flat sur-
face.
The multipurpose brush can be connected to the
nozzle (A) using one or both extension tubes (C), or
it can be inserted directly onto the handle (A6).
To lock or release this attachment on the tubes or
handle, it is necessary to turn the clip (B) after inser-
ting the attachment on the relevant coupling point.
The clip (B) must also be turned to fix the extension
tubes in place.
To get the most from this attachment (D), it is neces-
sary, when vacuuming a surface, to move with a
backward motion.
All manuals and user guides at all-guides.com
15:43 Pagina 49
49