Publicité
Les langues disponibles
Les langues disponibles
interno_GB
14-09-2004
The nozzle (S), nozzles (O and R), and brush (U)
can all be fitted directly to the handle (A6) of the
nozzle (A) or to the extension tubes (C), following
the steps described previously. They can also be
used to dispense steam evenly over the surfaces to
be cleaned in order to dissolve dirt, which can then
be vacuumed up.
Suction+steam nozzle (N)
This attachment is recommended for medium-sized
surfaces or to wash/vacuum or vacuum fabric sur-
faces such as sofas, mattresses, etc., using the follo-
wing frames (supplied):
• the glass wiper frame (P) is recommended for
small mirrors, small windows, and cement glass
walls, etc.
• the bristled frame (Q) is recommended for rugs,
stairs, car interiors, and fabric surfaces in gene-
ral; it is also useful for removing hairs from these
surfaces.
To fit the required frame to the nozzle (N), it is suf-
ficient to press it on until it clicks into place.
The nozzle can be connected to the steam nozzle
(A) using one or both extension tubes (C), or it can
be fitted directly to the handle (A6).
To lock or release this attachment on the tubes or
handle, it is necessary to turn the clip (B) after inser-
ting the attachment on the relevant coupling point.
52
All manuals and user guides at all-guides.com
15:43
Pagina 52
Publicité
