Publicité
38. IEEE 488.2 COMMON COMMANDS
38.1. INTRODUCTION
The common commands are defined by the IEEE 488.2 standard. They are operational on all instruments which are specified IEEE
488.2. They command basic functions such as:
„ identification,
„ reset,
„ configuration reading,
„ reading of event and status register,
„ reset of event and status register.
If a command containing one or several directories has been received, and if a common command has been stacked up, then the
instrument stays in this directory and execute normally the commands.
38.2. EVENTS AND STATUS MANAGEMENT
38.2.1. REGISTERS
96
Publicité
