Publicité
36.4. DISPLAY
36.4.1. DISPLAY MODE
DISPlay[:WINDow]:TRACe
:MODE
36.4.2. OSCILLOSCOPE / XY
DISPlay[:WINDow]
:TRACe:FORMat
36.5. MEASURE
36.5.1. REFERENCE
DISPlay[:WINDow]:CURSor
:REFerence
36.5.2. MEASUREMENT QUERY
MEASure:MINimum?
MEASure:MAXimum?
MEASure:PTPeak?
MEASure:LOW? (Query)
MEASure:HIGH? (Query)
(Command/Query)
The DISP:TRAC:MODE <ENVelope|ALL> command selects the sample display mode.
ENVelope : displays in the "Envelope" mode
„
ALL :
displays in the "All acquisition" mode
„
To the question DISP:TRAC:MODE?, the instrument returns the active display mode.
(Command/Query)
The DISP:TRAC:FORM <A|XY> command selects the display mode of the instrument.
A validates the Oscilloscope display mode : Y = f(t)
„
XY validates the XY display mode : Y = f(x)
„
To the question DISP:TRAC:FORM?, the instrument returns the active display mode.
(Command/Query)
The DISP:CURS:REF <INT{1|2|3}> command selects the reference for the automatic and manual
measurements.
To the question DISP:CURS:REF?, the instrument returns the signal used as reference.
(Query)
To the question MEAS:MIN? <INT{1|2|3}> the instrument returns the value minimum of the selected
signal.
Response format:
value in format <NR3> expressed in volt.
(Query)
To the question MEAS:MAX? <INT{1|2|3}> the instrument returns the maximum value of the selected
signal.
Response format: <measured value><NL>
value in format <NR3> expressed in volt.
(Query)
To the question MEAS:PTP? <INT{1|2|3}> the instrument returns the peak-to-peak value of the selected
signal.
Response format:
value in format <NR3> expressed in volt.
To the question MEAS:LOW? <INT{1|2|3}> the instrument returns the low level value of the selected
signal.
Response format:
value in format <NR3> expressed in volt.
To the question MEAS:HIGH? <INT{1|2|3}> the instrument returns the value of the high level level of
the selected signal.
Response format:
value in format <NR3> expressed in volt.
<measured value><NL>
<measured value><NL>
<measured value><NL>
<measured value><NL>
84
Publicité
