PeakTech 3320 Mode D'emploi page 39

5. Measuring
5.1. Data Hold
The data hold function allows the meter to "freeze" a measurement for
later reference.
1. Press the "HOLD" button to freeze the display, the "HOLD" indicator
will appear in the display.
2. Press the "HOLD" button to return to normal operation.
5.2. Min./Max.-Hold
This function shows the min. - and max. value in the display. Follow the
described procedure to activate this function.
1. Press RANGE-button to reach the respective measuring range, to
make sure, that the measured MIN./MAX.-value will fall under or
exceeds the measuring range.
2. Press MIN/MAX-button to reach the MIN/MAX-function.
3. Place the test leads to the circuit to be measured.
4. Readout and analyse the measured value in the LCD-Display.
5. For leaving the MIN/MAX-function, press the MIN/MAX-button for 2
seconds.
-39-