Capacitance Measurements; Temperature Measurements - PeakTech 3320 Mode D'emploi

4. Read the frequency in the display. The digital reading will
the proper decimal point, symbols (Hz, kHz, MHz) and value.

5.9. Capacitance measurements

Warning:
To avoid electric shock, disconnect power to the unit under test and
discharge all capacitors before taking any capacitance measurements.
Remove the batteries and unplug the line cords.
1. Set the function switch to the "CAP" position.
2. Insert the black test lead into the negative COM jack and the red test
lead into the positive V//CAP-jack.
3. Touch the test leads to the capacitor to be tested. The display will
indicate the proper decimal point, value and symbol.

5.10. Temperature measurements

Warning:
To avoid electric shock, disconnect both test probes from any source of
voltage before making a temperature measurement.
1. Insert the adapter in the input socket (+ to V/and – to COM-socket)
for temperature measurements.
-44-
indicate