Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2.
Open the battery/fuse door by loosening the screws on the
battery/fuse door using a screw-driver.
3.
Clip the new battery into battery holder, observing the correct
polarity.
4.
Place the battery into the battery/fuse compartment.
5.
Put the battery/fuse door back in place. Secure with the
screws.
6.
Dispose of the old battery properly
Warning:
To avoid electric shock, do not operate your meter until the back cover
and the battery / fuse door is in place and fastened securely.
Note:
If your meter does not work properly, check the fuses and batteries to
make sure that they are still good and that they are properly inserted.
-48-
Publicité
Table des Matières
