Remote access
A condition for using remote access is that you know the PIN code assig-
ned to the function.
The preset PIN code is 321. You can set your own individual PIN code.
Changing the PIN code
... press for 2 seconds. The digit for the first number in the PIN code
flashes.
Use the
and
... press to set the next digit.
The procedure to set the second and third digit is identical.
Remote access/control of the answering machine
You can access the answering machine from a distant phone which uses
tone dialling (multi−frequency dialling mode) and execute functions, i.e.,
you can play messages and/or delete messages.
Call your phone/answering machine from an external phone in tone
dialling mode. The settings defined you defined are valid (refer to
"Ring delay").
☞
If your answering machine is not switched on, it switches on automati-
cally after the tenth ring.
☞
If you only want to play new messages and have activated the tollsaver
function, you can put the receiver down after the third ring to interrupt the
call. If new calls have been recorded, the answering machine would have
taken your call after two rings. As a result, no costs ensue.
After you have listened to the outgoing message enter the remote
access PIN code (the default setting is 321). Two signal tones confirm
the correct PIN code has been entered. After the correct PIN code has
been entered, the machine awaits commands via the digit keys to exe-
cute the corresponding functions. If there is no key input, the connecti-
on is automatically ended.
buttons to select the required digit.
☞
Press the relevant keys on the phone to initiate the remote access or
remote control functions on the answering machine.
Key
Function
1
Play the current message again
2x 1
Play the previous message
2
Play message / Pause in playback
3
Play the next message
4
Play the outgoing message
5
Record an outgoing message
6
Stop playback or recording / End remote access
7
Delete the message currently playing
8
Switch off the answering machine
9
Switch on the answering machine / Select OGM 1 or 2
0
Delete all the old messages
✱
Skip the outgoing message
#
Record a memo
GB
7