Attaching And Aligning The Appliance - CONSTRUCTA CD679652 Notice D'utilisation Et De Montage

Installation
Screw on the fixing bracket for the flue duct. ¨
1.
Screw on brackets for the extractor hood hand-tight, max. 3
2.
Nm.©
Screw in threaded pin, leaving it protruding out of the wall by
3.
5 - 9 mm..ª
24

Attaching and aligning the appliance

Initially remove the protective foil from the back of the
1.
appliance and, following installation, remove the foil
completely.
When attaching the appliance, ensure that it engages firmly
2.
with the brackets. «
Align the appliance horizontally by turning the brackets. If
3.
required, the appliance can be moved to the right or left. ¬
Securing the appliance
Press the safety caps with the arrow upwards onto the
1.
brackets until they engage. ®
Screw on the knurled nut and washer firmly. ¯
2.