Kärcher MT CS 250/36 Mode D'emploi page 17

WARNING
Vibration and noise emissions during actual use of the
power tool may differ from the values given, depending
on the tool and in particular the type of workpiece used.
Identify the safety measures to protect the operator on
the basis of an exposure estimate under actual use con-
ditions (taking into account all parts of the operating cy-
cle, such as the release time).
Device with a hand-arm vibration value
> 2.5 m/s² (see chapter Technical Data in the
operating instructions)
CAUTION
● Uninterrupted use of the device
for several hours can lead to numbness. ● Wear warm
gloves to protect your hands. ● Take regular breaks
from work.
Declaration of Conformity
EU Declaration of Conformity
We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Battery-powered pole saw
Type: 1.042-511.0 + 1.042-512.0
Currently applicable EU Directives
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
Harmonised standards used
EN IEC 63000: 2018
EN 55014-1: 2017 +A11: 2020
EN 55014-2: 1997+A1: 2001+A2: 2008
EN 62841-1: 2015 +A11: 2022
EN ISO 11680-1:2011
EN ISO 11680-1:2021
EN ISO 12100:2010
Notified body, 0197 TÜV Rheinland LGA Products
GmbH; Tillystraße 2 D - 90431 Nürnberg, Germany has
carried out EC type approval, registration number: BM
50545282 0001
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/05/01
Declaration of Conformity (UK)
We hereby declare that the product described below
complies with the relevant provisions of the following
UK Regulations, both in its basic design and construc-
tion as well as in the version put into circulation by us.
This declaration shall cease to be valid if the product is
modified without our prior approval.
Product: Battery-powered pole saw
Type: 1.042-511.0 + 1.042-512.0
Currently applicable UK Regulations
S.I. 2016/1091 (as amended)
S.I. 2008/1597 (as amended)
S.I. 2012/3032 (as amended)
Designated standards used
EN IEC 63000: 2018
EN 55014-1: 2017 +A11: 2020
EN 55014-2: 1997+A1: 2001+A2: 2008
EN 62841-1: 2015 +A11: 2022
EN ISO 11680-1:2011
EN ISO 11680-1:2021
EN ISO 12100:2010
TUV Rheinland UK Ltd. Friars Gate (Third Floor), 1011
Stratford Road. Shirley, Solihull, B90 4BN A UKAS ac-
credited certification body No. 8400 Notified by the Dep-
partment for Business, Energy and Industrial Strategy
(BEIS) UK Approved Body No. 2571.
Certificate number: A6 50545283 0001
The signatories act on behalf of and with the authority of
the company management.
Documentation supervisor:
S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2022/05/01
Consignes de sécurité.........................................
Utilisation conforme.............................................
Protection de l'environnement.............................
Accessoires et pièces de rechange ....................
Etendue de livraison............................................
Dispositifs de sécurité .........................................
Symboles sur l'appareil .......................................
Vêtements de protection .....................................
Description de l'appareil ......................................
Mise en service ...................................................
Utilisation.............................................................
Transport .............................................................
Stockage .............................................................
Entretien et maintenance ....................................
Travaux de maintenance.....................................
Dépannage en cas de défaut ..............................
Garantie ..............................................................
Caractéristiques techniques................................
Valeurs de vibration et d'émission de bruits........
Déclaration de conformité UE .............................
Français
Contenu
18
20
20
20
20
20
20
21
21
21
21
22
22
22
22
23
23
23
23
24
17