Cleaning And Lubrication; Dismantling And Disposal - Sincro FB Serie Manuel D'instruction Et De Maintenance

ENGLISH

8. CLEANING AND LUBRICATION

Any kind of cleaning work must be carried
!
out with the generating set shutdown and
the mains power shut off for the risk of
WARNING!
severe hazard for persons and objects.
Make sure that the generating set is shutdown and the
mains power is shut off before cleaning the outside of the
generating set with compressed air.
Never and for no reason whatsoever use
!
fluids or water. Do not use compressed
air to clean internal electrical parts since
WARNING!
this could cause short circuits or related
problems.

9. DISMANTLING AND DISPOSAL

Only use authorised specialists.
!
WARNING!
All material should be eliminated in compliance with statutory
regulations.
The generator does not present any particular risks or
hazards during dismantling. To aid recovery of the material,
it is best to classify it by type (i.e. electrical parts, copper,
aluminium, plastic, etc.).
28