Installation; Lifting; Mounting On Engine; Assembling Shape Im B35 - Sincro FB Serie Manuel D'instruction Et De Maintenance

6. INSTALLATION

6.1 Lifting

Lift and handle the generator with suitable equipment either
on a pallet or by the lifting lugs located on the generator in
the positions indicated in the figure.
When lifting the generator use equipment with a
loadbearing capacity of at least 150kg.
An insufficient loadbearing capacity can
cause severe injury and damage.
CAUTION!
The lifting lugs on the generator have been
designed for lifting only the generator and
not the whole generating set.
CAUTION!
When lifting and handling single bearing generators they
must be kept horizontal in order to avoid, if operations should
go wrong, the rotor from slipping out and being damaged
and possibly causing severe injury.

6.2 Mounting on engine

6.2.1 Assembling shape IM B35

For tightening torques refer to section 6.2.6
CAUTION!
ENGLISH
21