Cleaning And Lubrication; Dismantling And Disposal - Sincro SK225 Serie Manuel D'utilisation Et De Maintenance

Any kind of cleaning work must be carried
out with the generating set shutdown and the
mains power shut off for the risk of severe
WARNING!
hazard for persons and objects.

8. CLEANING AND LUBRICATION

Make sure that the generating set is shutdown and the
mains power is shut off before cleaning the outside of the
Never and for no reason whatsoever use
fluids or water. Do not use compressed air to
clean internal electrical parts since this could
cause short circuits or related problems.
WARNING!
28
generating set with compressed air.
Only use authorised specialists.
WARNING!

9. DISMANTLING AND DISPOSAL

All material should be eliminated in compliance with
statutory regulations.
The generator does not present any particular risks or
hazards during dismantling. To aid recovery of the material,
it is best to classify it by type (i.e. electrical parts, copper,
aluminium, plastic, etc.).