Connecting To A Computer - Sonoro PLATINUM SO-2000 Mode D'emploi

Connecting the paired Bluetooth device
2.
PLATINUM can register information for up to
8 paired devices, you do not have to pair the
next or subsequent times you connect the
device to the turntable.
• Press the BT button on the turntable to start
connection mode. The indicator will become
blue and blink slowly.
• Make the Bluetooth device ready to connect.
• Pairing is automatically done. When the
turntable and the Bluetooth device are
connected, the pairing lamp will stay lit
without flashing.
Disconnecting the paired Bluetooth device
3.
Press the BT button for at least 2 seconds to
•
disconnect the paired Bluetooth device to
turntable. The indicator will become blue and
flash rapidly.
• Press the BT button in Bluetooth
connection mode, it will switch off the
Bluetooth function.
• If no Bluetooth device is found for five
minutes, Bluetooth indicator will become
unlit.
• Below is the BT indicator status for
different operating status.
Operating status
Searching
Pairing
for device
Waiting
to be
connected
Connection
Connected
40
BT indicator (blue)
Fast blinking
Slow blinking
Lit
8.

Connecting to a computer

The sound of a record can be digitally recorded
on a computer by using the provided USB cable
to connect the turntable (type B) to a USB port
(type A) of the computer.
Note:
• The USB output signals can be used only for
recording, not for playback.
• The turntable will run with the standard
Windows or Mac driver so there is no need to
install a special driver.
• The computer will automatically detect the
turntable's USB port and identify as USB
Audio CODEC.
• You must first install software that can be used
for audio recording on the computer.
• You may purchase the audio recording
software that you prefer separately or
download free software such as Audacity
(https://www.audacityteam.org/), from the
Internet.
• If the application does not work successfully,
please contact your computer administrator
for help.
• When recording with a computer, do not
disconnect the USB cable and put the
turntable into standby.
• The recorded music is limited to private use
only. Use of the music beyond this limit
requires permission of the copyright holders.
1. Connect a computer to your turntable
with provided USB cable.
P R E
2. Rotate the Speed rotatory switch knob to
start playing of a record.
3. Use your recording application to record
audio tracks onto the computer.
• For detail instructions on using the
application and transferring audio tracks,
refer to the application user guide.
© sonoro audio GmbH 2021
A M P U S B
USB cable