Sonoro PLATINUM SO-2000 Mode D'emploi page 33

• Remove the red ribbon from the drive belt.
Ribbon
• Rotate the turntable several times to make
sure that the drive belt is secure and rotating
smoothly.
4. Placing the mat
• Place the mat of the platter on the platter.
• The mat has a top and a bottom. The side
with the ridged concentric circles should be
placed down.
Top
Bottom
© sonoro audio GmbH 2021
5. Installing the counterweight
• Place the counterweight over the end of
tonearm, and slowly turn it anti-clockwise
while gently pushing it.
6. Installing the headshell
• Insert the headshell on the end of tonearm.
• Turn the lock nut in the clockwise direction to
secure the headshell.
7. Removing the stylus protective cover
• Hold the stylus protective cover from its front
and back, and while pushing the latch on the
rear part.
• Slowly tile the cover downward.
8. Setting the tonearm balance
• Set the anti-skating dial to zero.
Anti-skating dial
GB
Counterweight
Lock nut
33