Sonoro PLATINUM SO-2000 Mode D'emploi page 35

• The recommended tracking force of the
included cartridge is 1.8g.
10. Setting the anti-skating dial
• Set the anti-skating value is the same as the
tracking force gauge range value.
11. Installing the dust cover
Note:
• The dust cover is designed to protect the
turntable sensitive components. When the
product is not in use, it should remain close.
• Do not open or close it when a record is
playing.
• Be careful not to pinch your finger when
opening and closing the dust cover
• Do not place anything on the dust cover.
© sonoro audio GmbH 2021
• Insert the dust cover hinges completely into
the hinge holders on the dust cover.
Hinge holder
Dust cover hinge
• Align the dust cover hinger with the hinger
holder on the rear of the turntable and push
in the dust cover.
12. Opening and closing the dust cover
Opening
• Hold the front edge of the dust cover and
gently lift it open completely until it stops.
• The dust cover will stay open in its positions.
Closing
• Gently lower the dust cover until it is closed.
GB
35