1. Switch on the turntable.
• Press the ON/OFF button on the back of the
turntable to turn it on.
P R E
A M
P
U S B
2. Open the dust cover gently.
3. Remove the stylus protective cover.
4. Place a record on the platter
Place the record on the mat of the platter
•
so that the center hole aligns with the
spindle.
38
OFF
ON
Record
To play 7-inch (17cm) records (EP records),
•
place the supplied 45 RPM adapter on the
spindle.
5. Use the Speed / STOP rotatory switch
knob
Note:
• The rotation speed is usually printed on the
center label of the record or the record jacket.
• The rotation speed can be set to 33 or 45
RPM. Select the rotation speed appropriate
for the record.
• When the Speed / STOP rotatory switch knob
is set to 33 or 45 position, the platter will start
rotating.
6. Release the tonearm rest clamp.
7. Raise the tonearm lifter.
© sonoro audio GmbH 2021
45-RPM adapter