Sonoro PLATINUM SO-2000 Mode D'emploi page 34

• Release the tonearm rest clamp.
Tonearm rest clamp
• Raise the tonearm lifter.
Tonearm lifter
• Holding the finger lift of the headshell, move
the tonearm over the turntable.
• Lower the tonearm lifter.
• Adjust the counterweight so that the tonearm
is floating parallel to the turntable.
34
• Return the tonearm to its original position.
• Lock the tonearm rest clamp.
9. Setting the tracking force
• Turn the tracking force gauge ring so that the
center line aligns with 0 on the scale.
• Only turn the ring. Be careful not to let the
counterweight turn.
Tracking force
gauge ring
• Turn the counterweight and the tracking force
gauge ring together so that the tracking force
gauge ring scale matches the stylus pressure
specified for the cartridge.
Center line
© sonoro audio GmbH 2021