BH LK500Ti Guide D'utilisation page 24

4. The screen will display READY GO and the workout will start after a 3 seconds
countdown.
PROGRAMS P3-P6 are set up the same way as P2.
RANDOM (Random Speed)
1. Find RANDOM and press ENTER to select.
2. Press SPEED+ or SPEED- to select your target time and then press ENTER to input.
3. Press SPEED+ or SPEED- to select target distance and then press ENTER to input.
4. Press SPEED+ or SPEED- to select target calories and then press ENTER to input. 4.
When you have finished your setup, press START to enter begin your workout.
USER (USER CAN EDIT SPEED & INCLINE PROFILE)
1. Find USER and press ENTER to select.
2. Press SPEED+ or SPEED- to choose U1, U2, U3, or U4 and then press ENTER to
select.
3. Press ENTER for 3 seconds to enter into Segment Edit Mode. Press SPEED+ or SPEED-
to adjust Speed and press INCLINE+ or INCLINE- to adjust incline and then press
ENTER to input and go on to the next segment (there are 20 in total). When you are
done with all segments, press ENTER for 3 seconds to save your custom values.
4. Press ENTER to select U1.
5. Press SPEED+ or SPEED- to set time and then press ENTER to input.
6. Press SPEED+ or SPEED- to set distance and then press ENTER to input.
7. Press SPEED+ or SPEED- to set calorie and then press ENTER to input.
8. When you are done press START to begin the workout.
H.R.C: 60%/75%/THR
1. There are three HRC programs, find and choose between 60%, 75%, or THR (Target
Heart Rate) and then press ENTER to select.
Note: In the HRC Program, the computer will only accept the "Wireless Heart Rate Signal"
(we suggest using a wireless heart belt). If no pulse signal is detected for 45 seconds, the
computer will stop and display NO PULSE.
60%, 75%
1. Press ENTER to select 60% (or 75%)
2. Press SPEED+ or SPEED- to set time and then press ENTER to input.
24