BH LK500Ti Guide D'utilisation page 16

STEP 2 (this step will require two people)
Place the Lower Console Structure (E) above the Left & Right uprights (C,D). Attach the
control wire sticking out of the Right Upright (D) to the guide wire located on the bottom
right of the lower console structure. Then pull the control wire through the lower console
structure with the guide wire. Then attach the Lower Console Structure (E) to the Left &
Right Uprights (C,D) with the Nylon Nut (a) and tighten the Screws (c). Attach the Left
& Right Motor Lateral Covers (F,G) with Screws (b), tighten securely.
16