Sirius S-DD2 FSEE Instructions Pour L'emploi page 22

Other functions:
- After 30 hours of appliance operation, the push button panel indicates saturation of the
grease filters by the buttons flashing. To reset, press the timer button.
- After 4 hours of continuous operation from the last setting, the appliance turns off and
closes automatically.
- When the front panel is removed for cleaning and maintenance operations, all the electronic
aspiration and movement functions are locked.
- Anti pinching safety device: if anything is obstructing the closure operation of the down-
draft, the operation will stop and the downdraft will move up again.
TIMING
As a result of the new EU65 "Energy label" and EU66 " Ecodesign" regulations issued by the
European Commission, which came into force as from January 1st, 2015 , our products have
been adapted to comply with these new requirements.
All of the models complying with the energy label requirements, are equipped with new
electronics including a timer device for suction speeds control, when the air capacity
exceeds 650m³/h.
Internal motor models, with maximum air capacity higher than 650m³/h, are equipped with
a timer device that automatically switches the suction speed from 4
minutes operation.
External motor models are equipped with remote motors that , as for internal motor versions,
include a timer device that switches down the suction speed when it exceeds 650 mᵌ/h. (See
External Motors Instructions )
Remote motors, whose air capacity exceeds 650m³/h at both 4
following by default timer control functions:
The suction speed is automatically switched from 4
If the appliance is working at 3
minutes operation. Operation speeds can also be changed during operation.
The energy consumption of the appliance in stand – by mode is lower than 0.5W.
th
rd
speed, it is automatically switched to 2
22
th
to 3
th rd
and 3 speed , will have the
nd
to 2 speed, after 6 minutes operation.
rd
speed, after 6
nd
speed, after 7