Flex WST 700 VV Notice D'instruction D'origine page 25

Spare parts and accessories
Other accessories, in particular insertion tools,
can be found in the manufacturer's catalogues.
Exploded drawings and spare-part lists can be
found on our homepage: www.flex-tools.com
Disposal information
t^okfkd>
oÉåÇÉê=êÉÇìåÇ~åí=éçïÉê=íççäë=ìåìë~ÄäÉ=
Äó êÉãçîáåÖ=íÜÉ=éçïÉê=ÅçêÇK
EU countries only
Do not throw electric power tools
into the household waste!
In accordance with the European Directive
2012/19/EC on Waste Electrical and
Electronic Equipment and transposition into
national law used electric power tools must
be collected separately and recycled in an
environmentally friendly manner.
klqb
mäÉ~ëÉ=~ëâ=óçìê=ÇÉ~äÉê=~Äçìí=Çáëéçë~ä=çéíáçåë>
-Declaration of Conformity
We declare under our sole responsibility that
the product described under "Technical Data"
conforms to the following standards or
normative documents:
EN 60745 in accordance with the regu-
lations of the directives 2004/108/EC,
2006/42/EC, 2011/65/EC.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
Eckhard Rühle
Manager Research &
Development (R & D)
27.01.2014
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
24
Klaus Peter Weinper
Head of Quality
Department (QD)
Guarantee
When a new machine is purchased,
FLEX issues the end user with a 2-year
manufacturer's warranty which comes into
force on the date the machine was purchased.
The guarantee covers only defects which can
be attributed to a material and/or production
fault as well as non-performance of warranted
characteristics. When making a claim under the
guarantee, enclose the original sales receipt
with purchase date. Repairs under the
guarantee may be carried out only by work-
shops or service centres authorised by Flex.
A claim may be made under the guarantee only
if the power tool has been used as intended.
The guarantee excludes in particular opera-
tional wear, improper use, partly or completely
dismantled machines as well as damage
caused by overloading the machine, use of
non-permitted, defective or incorrectly used
application tools. Damage which is caused by
the machine on the application tool or work-
piece, use of force, consequential damage
which can be attributed to improper or inade-
quate maintenance on the part of the customer
or a third party, damage caused by external
effects or foreign objects, e.g. sand or stones,
as well as damage caused by non-observance
of the operating manual, e.g. connection to an
incorrect mains voltage or current type. Claims
for insertable tools or accessories can only be
made under the guarantee provided they are
used with power tools for the intended or
permitted use.
Exemption from liability
The manufacturer and his representative are
not liable for any damage and lost profit due to
interruption in business caused by the product
or by an unusable product.
The manufacturer and his representative are
not liable for any damage which was caused
by improper use of the power tool or by use
of the power tool with products from other
manufacturers.
WST 700 VV