Water Drain - Salvis Vitality Pro Instructions D'installation Et Mode D'emploi

11.3

Water drain

D The hoses and waste pipes must be heat-resistant > 100°C.
D Lay the waste pipe and hose with a fall of at least 3% to the drain.
D The waste pipe may not become narrower.
D Do not connect the appliance directly to the drain. The connection must be made using the
options shown below.
Pipe
Vent
opening
Hose
2 cm
Open separator
Hose
Outlet with open separator
D Drain pipe open into hopper.
D Hopper not placed beneath the appliance.
D At least 2 cm gap between drain pipe and
upper edge of hopper.
Permanent connection with venting
hopper
D Hopper not placed beneath the appliance.
en
67