Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en
4.
Creating, modifying and deleting programmes
Caution. If the customer service uploads a new version of the software, all your modified and
stored data will be lost. You should therefore first note down the settings you have applied.
4.1
Creating programmes
Up to three cooking phases can be stored in a programme. A programme contains at least one
cooking phase. A programme cannot be created without a cooking phase.
Input options for each cooking phase:
− cooking temperature,
− cooking time or core temperature
− buzzer on/off (between the cooking phases).
If you switch on the buzzer for the first and second cooking phases, the end of a cooking phase
must be confirmed by pressing the buzzer key
This setting is needed, for instance, if you wish to stir the food between the cooking processes.
Before you can create a new programme, you must first know a free programme number. You
can find the free programme numbers from
− the cookbook,
− the recipe list, or
− from the control system.
4.1.1
Reading the free programme numbers from the control system
D The appliance must be ready for operation and heated up.
If no programme number is currently being displayed
D The indicator lights in the programme key
. Press the programme key
D The programme last set will be displayed.
Reading the free programme numbers
. Press and hold the program memory
D The remaining free programme numbers will be displayed in sequence in the display
field
52
. Only then will the next cooking phase start.
and the temperature key
and
keys together.
flash.
Publicité
Table des Matières
