Setting The Start Time Preselection - Salvis Vitality Pro Instructions D'installation Et Mode D'emploi

en
5.

Setting the start time preselection-

You can use this function to have a programme you have selected, e.g.
time you specify.
Start time preselection (up to 24 hours) is only possible if you are using programmes.
The start time preselection function is not possible while "rE" is displayed.
Please take note. For health reasons, food should not be stored for too long at room tempera-
ture. The appliance must also be supervised.
Before setting
D The appliance must be ready for operation and heated up.
. Check the clock and adjust as necessary.
. Put the food in the cooking compartment.
. Set the desired cooking programme
Setting the start time preselection-
. Press the start time preselection key
D The indicator light in the key flashes.
D The start time last entered will be displayed.
. Press the time key
D The indicator lights in the time key
. Enter the start time using the numeric keys.
. Press the entry confirmation key
D The starting time will be accepted.
D The indicator light in the time key
D The indicator light in the start time preselection key
. Press the Start/Stop key
D All cooking and temperature displays go out.
D The indicator light in the start time preselection key
D The starting time set will be displayed.
D The cooking process will be started automatically when the preselected time set is reached.
D Once the cooking process has started automatically, the programme number will be dis-
played and the Start/Stop key lights up.
56
and the start time preselection key
goes out.
flashes.
lights up.
started at a
flash.