Setting The Time And Date - Salvis Vitality Pro Instructions D'installation Et Mode D'emploi

3.3

Setting the time and date

Adjustment and display is not possible during a cooking process.
If the appliance has been without a power supply for a number of days, the time will be set to
zero and will have to be re-entered once the appliance is switched on.
The input must be made in the following sequence.
. Switch the appliance on − press the "on/off" key
D The appliance must be displaying one of the following two states to allow an adjustment to
be made:
− The indicator light and the display
− the indicator lights in the keys flashing
Time
. Press the time of day key
D The indicator light in the key flashes.
D The display shows
D Enter the hour and minutes using the numeric keys,
e.g. for 10:27 a.m. − enter in sequence
. Confirm input − press entry confirmation key
D The display shows
Date
. Enter the date using the numeric keys, e.g.
. Press the decimal point key
D The display shows
. Enter the month using the numeric keys, e.g.
. Confirm input − press entry confirmation key
D The display shows
Year
. Enter the year using the numeric keys, e.g.
. Confirm input − press entry confirmation key
D All entries are stored.
D The time is displayed.
flashing while the appliance is heating up
and
en
45