CAME BKV15AGE Manuel D'installation page 74

Show clock
Enable the clock on the display.
Timer management
Set the clock
Set the date and time.
Timer management
Automatic DST
Enable automatic daylight saving time setting.
Timer management
Time format
Choose the clock display format.
Timer management
Create new timer
Time one or more types of activation chosen from those available.
Timer management
Remove timer
Removes one of the saved timings.
Timer management
Commands
Run certain gate commands without the control devices.
Commands
Show clock
Set the clock
Automatic DST
Time format
Create new timer
Remove timer
Use the arrows and the Enter button to enter the desired values.
Deactivated (Default)
On
24-hour
12-hour
Use the arrows to choose the desired function.
Open / Partial opening / Output B1-B2
Press ENTER to confirm.
Use the arrows to set the start and end time of the function activation.
Start time / end time
Press ENTER to confirm.
Use the arrows to set the function activation days
Select days / Whole week
Press ENTER to confirm.
Use the arrows to choose the timing to be removed.
0 = [Opening]
P = [Partial opening]
B = [Output B1-B2]
Press ENTER to confirm.
Open
Partial opening
Close
Stop
Use the arrows to select the command to be executed.
Press ENTER to confirm.