CAME BKV15AGE Manuel D'installation page 47

Control board
The functions on the input and output contacts, the time settings and user management are set and viewed on the display.
All connections are protected by quick fuses.
For the system to work properly, before fitting any plug-in card, DISCONNECT THE MAIN POWER SUPPLY and remove any batteries.
Before working on the control panel, disconnect the mains power supply and remove the batteries, if any.
1
Terminal board for connecting the gearmotor
2
Terminal board for connecting the encoder
3
Terminal board for connecting the RGP1 module or 806SA-0090 card
4
Programming buttons
5
RSE card connector
6
Connector for CAME KEY
7
Connector for plug-in radio frequency card (AF)
8
Terminal board for connecting the antenna
9
Terminal board for connecting the safety devices
10
Terminal board for connecting the paired function or the CRP
11
Terminal board for connecting control devices
12
Terminal board for connecting the keypad selector
13
Terminal board for connecting the transponder selector switch
Remove the card cover before inserting the cards into the connectors.
14
Terminal board for connecting the signalling devices
15
Terminal board for B1-B2 output
16
Connector for the R700 or R800 decoding card
17
Connector for the RIOCN8WS module
18
Connector for the clock card (806SA-0120)
19
Terminal board for limit-switch micro-switches
20
Accessories fuse
21
Control board fuse
22
Terminal board for connecting the transformer
23
Memory Roll card connector
24
Display
25
Line fuse
26
Power supply terminal board