Mayr ROBA-stop-Z Instructions De Montage Et De Mise En Service page 11

Installation and Operating Instruction for ROBA-stop
Dual Circuit Fail Safe Brake Type 892.10_.0
Sizes 60 - 2000
Please read and observe this Operating Instruction carefully!
A possible malfunction or failure of the brake and any damage may be caused by not observing it.
Table of contents:
Page 1:
Page 2:
Page 3:
Page 4:
Page 5:
Page 6:
Page 7:
Page 8:
Page 9:
Page 10:
Chr. Mayr GmbH + Co. KG
Eichenstraße 1
D-87665 Mauerstetten
Germany
- Table of contents
- Manufacturer's declaration
- Safety regulations
- Required protective measures by the user
- Note for electromagnetic compatibility (EMV)
- Standards and instructions
- Conditions of the units
- Brake views
- Parts list
- Application
- Table 1: Friction power
- Assembly conditions
- Assembly
- Table 2: Brake torques and tightening torques
- Noise damping
- Temperature sensor
- Electric connection of the brake
- ON-switching of the brake
- OFF-switching of the brake
- Brake inspection
- Inspection dual circuit function
- Bake torque adjustment
- Table 3: Brake torque adjustment and rotor thickness new
- Release monitoring
- Wiring diagram
- Function
- Assembly
- Adjustment and functional inspection of the micro switch
- Table 4: Feeler gauge
- Illustration release monitoring
- Table 5: Maximum/minimum switch capacity
- Wear monitoring
- Function
- Wiring diagram
- Assembly
- Adjustment and inspection of the micro switch
- Functional inspection with feeler gauge
- Illustration wear monitoring sizes 60 - 125
- Illustration wear monitoring sizes 250 - 2000
- Table 6: Maximum/minimum switch capacity wear monitoring sizes 60 - 125
- Table 7: Maximum/minimum switch capacity wear monitoring sizes 250 - 2000
- Table 8: Measuring strip thickness and number of spacer sleeves
- Maintenance
- Breakdowns
Telephone 08341/804-241+242
Telefax 08341/804-422
http://www.mayr.de
E-Mail: info@mayr.de
Page 1 of 10
®
-Z
(B.8.2.0.GB)
15/05/2003 TK/Kr