Allmatic My AMT box Guide De L'utilisateur page 67

APP ALLMATIC DOMO
The Allmatic Domo App is a tool to control devices in a simplified way without having to
use a Web Browser, it has a slightly different interface, however the access modes and
credentials remain unchanged
Thanks to the Allmatic Domo App, it is possible to control multiple myamtbox gateways from a single control panel (e.g. one in the
home, one in the office, one in a second home, etc.).
ATTENTION! From the App it is NOT possible to make advanced configurations, the
same must always be done locally (web browser), regardless of whether myamtbox is
configured as ACCESS POINT or as a CLIENT of a network. The App, in case you need to
make advanced configurations, will automatically redirect to the web page by clicking
on the icon in the shape of home
1. Open App Allmatic Domo (iOS, Android).
App available on
3. Enter myamtbox login credentials (the first one you want to manage)
6-1620310 - rev.2 - 25/05/2020
2. Once the App has started, some illustrative screens are
proposed, you need to scroll to the right to reach the login
page.
After reaching the login page, you can:
A
Configure myamtbox. In this case app redirects to the
browser, where you can make advanced system configurations,
such as add devices to control, change user data and
passwords, activate services etc.
If you need to configure MYAMTBOX, see the
local system management part of this manual
(adding devices, menu navigation, changing user
data, etc.)
B
Access myamtbox to control devices on an existing and
previously configured user, see next point.
A
B
31 / 36