Allmatic My AMT box Guide De L'utilisateur page 50

D
SETTING THE TRANSMISSION DURATION.
The functionality allows to increase the duration of the transmission in the presence of environmental radio disturbances, thus
making it more effective. The standard transmission time is 0.5 seconds (factory setting).
You can change the transmission duration from 500ms (0.5
seconds) to 4000ms (4 seconds).
To change the same move the point on the segment up to the
desired value and confirm with the button Save.
14 / 36
The transmission is indicated by a dynamic icon that will last
for the duration of the transmission.
6-1620310 - rev.2 - 25/05/2020