Allmatic My AMT box Guide De L'utilisateur page 42

MYAMTBOX CONNECTIONS
(MORE DETAILS PAG. 26-27)
The Alldomus system can be used in different ways, the possible configurations and links are shown below:
- Access Point (factory) mode (see points 1, 2), direct access to the wi-fi network generated by MYAMTBOX
- Client mode with internet connection (see point 3), MYAMTBOX is a network client, in this case it is therefore necessary to contact
MYAMTBOX via the network itself by configuring the network's own router, MYAMTBOX will be connected to the Internet using the navigation
data provided by your router (home, office, ...). It will be necessary to access the router in use (home, office, ...) by consulting the access
data (IP and password) usually reported on a label under the router.
In this way it will be possible to remotely control the automations through the web-accessible cloud page (www.allmaticmobile.com)
1. ACCESS POINT / STAND ALONE MODE
MYAMTBOX WORKS INDEPENDENTLY THROUGH ITS WI-FI NETWORK WITH THE VARIOUS CONNECTED DEVICES
(SMARTPHONE, TABLET, PC)
2. LAN ACCESS POINT CONNECTED BY CABLE TO A ROUTER (home, office, company)
INTERNET CONNECTION AVAILABLE
If your Internet connection is via an Ethernet cable from the wall instead of a modem, connect the Ethernet cable directly to the
router's Internet port, see image below
ACCESS
POINT
6 / 36
ACCESS
POINT
Existing system
in the house,
o ce, ...
Internet
Connection
Modem
6-1620310 - rev.2 - 25/05/2020
pc
Router