the cable is damaged or needs to be replaced, this must be carried out the by
• If
after-sale agent with dedicated tools to avoid any accidents.
the appliance is being connected directly to the mains, install an omnipolar
• If
circuit-breaker with a minimum opening of 3mm between contacts.
• The installer must ensure that the correct electrical connection has been made and
that it is compliant with safety regulations.
• The cable must not be bent or compressed.
• The cable must be checked regularly. Only authorised technicians may replace it.
This appliance requires a 32 Amp Miniature Circuit Breaker.
DISPOSAL: Do not dispose
of this product as unsorted
municipal waste. Such waste
must be collected separately
for special treatment.
This appliance is labelled in compliance with European Directive
2011/65/EU on Waste Electrical and Electronic Equipment (WEEE). By
ensuring that this appliance is disposed of correctly, you will help prevent
any possible damage to the environment and to human health that might
otherwise occur if it were disposed of
The symbol on the product indicates that it may not be treated as normal
It
household waste.
should be taken to a collection point for recycling of
electrical and electronic goods.
This appliance requires specialist waste disposal. For further information
regarding the treatment, recovery and recycling of this product, please
contact your local council, your household waste disposal service, or the
shop where you purchased it.
For more detailed information about treatment, recovery and recycling of
this product, please contact your local council, your household waste
disposal service or the shop where you purchased it.
21
inappropriately.