Bertazzoni P604I2M28NV Manuel D'installation Et D'utilisation page 34

Using your Induction Hob
To start cooking
1. Touch the ON/OFF (A) control for 3 seconds.
After power on, the buzzer beeps once; all displays show " -
" to indicate that the induction hob has entered standby
mode.
2. Place a suitable pan on the cooking zone that you
wish to use.
•
Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
3. Adjust heat setting by touching the slider control (E) for the heating zone where the pan
is placed.
POWER DOWN
• If you do not choose a heat setting within 20 seconds, the induction hob will
automatically switch off. In this case, you will need to start again at step 1.
• You can modify the heat setting at any time during cooking.
POWER UP
10