Bertazzoni P604I2M28NV Manuel D'installation Et D'utilisation page 39

Hint: Touch the "-" or "+" timer keys once to decrease or increase by 1 minute. Touch and hold the "-
" or "+" timer keys to decrease or increase by 10 minutes.
3. When the time is set, it will begin to count down immediately. The display will show the
remaining time and the dot next to the timer indicator will continue flashing.
4. The buzzer will beep and the timer indicator will turn off when the set time has
elapsed.
Setting the timer to switch off zones
1. After selecting the cooking zone and required power level by touching the power slider
(E), the dot next to power level indicator will flash for 5 seconds
2. Before the dot stops flashing, touch the timer control key (D) ''–'' or ''+'' to set the time
from 1 to 99 minutes.
Hint: Touch the "-" or "+" timer keys once to decrease or increase by 1 minute. Touch and
hold the "-" or "+" timer keys to decrease or increase by 10 minutes.
3. When the time is set, it will begin to count down immediately. The timer setting indicator
(J) will show the remaining time and the timer indicator will flash for 5 seconds.
4. After that, if the indicator (J) continues flashing, it means that the timer setting indicator
shows the remaining time until the timer expires for the corresponding zone, otherwise the
indicator (J) will remain lit until the time elapses.
5. When the cooking timer has elapsed, the corresponding cooking zone will switch off
automatically. Other cooking zones will keep operating if they were turned on previously.
6. When simultaneously using "the timer as an alarm" and "the timer to switch off the
zones", the display will show the remaining alarm time as its first priority. Press the cooking
zone power slider (E) to show the remaining time of the switch-off timer.
14