Bertazzoni P604I2M28NV Manuel D'installation Et D'utilisation page 44

Locating the fixing brackets
The unit should be placed on a stable, smooth surface (use the packaging). Do
not apply force to the controls protruding from the hob.
fig. 1
Stretch out the supplied seal along the bottom edge of the
hob, ensuring the ends overlap.
Do not use adhesive to fix the hob into the worktop.
Once the seal is fitted, position the hob into the cut-out in the worktop. Apply
gentle downwards pressure onto the hob to push it into the worktop and ensure a
good seal around the outer edge (fig. 3)
fig.
2
19
01
[01]
fig. 3