Wander Lead With Spiral Cable - Dhollandia ELEC OPTIONS 02 Instructions De Montage

Table des Matières

Publicité

EN

3. WANDER LEAD WITH SPIRAL CABLE

The wander lead with spiral cable should only be used
under the safe working conditions described under §1.1
and §1.2 above.
Taking into account the recommendation under 8 of §1.1,
if no hinged foot protector [4-5 under §1.1] or safety cut-
out [6 under §1.1] is used, the wander lead with spiral
cable can only be used:
On the platform, from a safe working zone of min.
400x400 mm, clearly and permanently marked at min.
250 mm distance from the hazard zone between the
platform and the rear of the vehicle floor [See Fig. 3.1].
Inside de vehicle body, from a safe working zone of
min. 400x400 mm, clearly and permanently marked at
min. 250 mm distance from the hazard zone between
the platform and the rear of the vehicle floor [See Fig.
3.2].
On the ground, from a safe working zone min. 500
mm away from the side edge of the platform [See Fig.
3.3].
In order to mark the safe working zone on the platform,
you can use a paint template [See Fig. 3.4].
DHOLLANDIA
3.1
3.3
19
3.2
3.2
3.4

Publicité

Table des Matières
loading

Produits Connexes pour Dhollandia ELEC OPTIONS 02

Table des Matières