Napoleon GL22N Instructions D'installation Et D'opération page 12

12
4.4.2 GL2 8
EN
Place log (#1) onto the two pins and
ensure the log is pushed fl ush against
the burner support, to the rear of the
unit, as shown.
#4
Place log (#4) onto the pin.
4 .4 .3 GL3 2
Place the rear log (#1) onto the
2 pins on the grate as shown.
Place log (#4) onto the pin.
Place log (#7) onto the pin as shown.
W415-1101 / B / 07.29.13
#1
Place log (#2) directly onto the grate
and ensure it is pulled to the front left
side of the grate.
Place log(#5) as shown and allow
it rest on the top of the previously
placed logs. Place one pin onto the
right side of the largest log as shown.
#1
Place log (#2) onto the grate as
shown.
#4
Place log (#5) onto rear log and
let it rest on log (#2). Place a
second pin into log (#1) as shown.
#7
#2
#5
PIN
#2
PIN
#5
PIN
Place log (#3) onto the grate and
ensure it is pulled to the front right
side. Ensure the two logs are centered
onto the grate. Insert one pin into the
hole of the back log as shown.
#6
Place log (#6) onto the pin.
PIN
Place log (#3) onto the grate as
shown. Place one pin into centre
of log (#1).
#6
Place log (#6) onto the pin as
shown. Place the remaining pin
into log (#1) as shown.
#3
#3