Technical Specifications - GYS NOMAD POWER PRO 700 Mode D'emploi

Translation of the original instructions
USING AS LED FLASH LIGHT
Press the switch 2
There are 4 modes of LED light appear in order (normal. strobe. SOS. off) if you press slightly.

TECHNICAL SPECIFICATIONS

Size: 228 x 99.5 x 38 mm
Weight: 820 g
Battery Capacity: 92,5 Wh
Output: Quick charge (5 V2,4 A; 9 V2 A; 12 V1,5 A); 5 V2,1 A; 15 V10 A
Type-C Max 60 W;12 V jumpstart
Input: Type-C Max 60 W
Full charging time: About 8/9 hours (5V/3A)
Starting current: 600A
Peakcurrent: 1500A
Operating temperature : 0°C — 50°C
Charging temperature : 10°C — 40°C
Storage temperature : -20°C — 50°C
TROUBLESHOOTING
Finding
No response when pressing the
switch button
TOXIC AND HARMFUL SUBSTANCES
Composition and amount of toxic and harmful substances in NOMAD POWER.
Pb
O
O : Indicate all homogeneous material's hazardous substances content are below the MCV limit specified in the Stan-
dard 2002/95/EC (RoHs)
WARRANTY
The warranty covers faulty workmanship for 1 year from the date of purchase (parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disassembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
12
NOMAD POWER PRO 700
3 seconds to start the LED flash light
Low voltage protection of NOMAD
POWER is started.
Hg
O
a
.
4
Cause
Cd Cr(Vi)
O O
Remedies
Plug the adaptor into the Quick Charge
input port to activate
PBB
O
EN
PBDE
O