Parts List; Safety Instructions - Ribimex PR4EN1T432 Manuel D'instructions Et D'utilisation

EN – Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
II. CHARACTERISTICS See Table 1
III. SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
WARNING!
To reduce the risk of injury, read the instruction manual and understand the
machine before use.
WARNING!
When using power tools basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury.
Save all warnings and instructions for future reference.
Keep this manual handy so that you may refer to it later whenever any questions arise. Always be sure
to include this manual when selling, lending, or otherwise transferring the ownership of this product.
Symbols (Explanation of symbols appearing on the tool, if applicable)
III. Safety instructions
IV. Getting Started
See Fig. 1
Caution! Risk of injury and/or damage and/or deterioration of product in case
of non-compliance to safety requirements
CE Conformity
Wear protective equipment: ear protection, goggles and dust mask.
Wear suitable protection clothing, protective gloves, safety footwear and
safety helmet.
Keep all your body parts away from moving parts.
Keep persons (esp. children) and animals away from product and working
area. (min. 15m)
Stop the tool as soon as someone enters the working area.
The operator is solely responsible for third persons in the working area.
Only use the product outdoors or in a well-ventilated area. Never start or run
the engine in an enclosed area. The exhaust emissions may contain toxic
carbon monoxide (CO), which may cause serious injury or death.
CAUTION! Risk of fire.
No smoking or open flame when operating or refilling the fuel tank.
V. Operation
VI. Maintenance and Storage
Page 19 / 52