Parts List - Ribimex RIBILAND Pila8 Manuel D'instructions Et D'utilisation

EN
I. Parts List
II. Characteristics
I. PARTS LIST
See Fig.1
II. CHARACTERISTICS
Description
Reference
Model / Type
Power
Battery
Charger
Motor
Working Pressure
maximum temperature of the
liquid
Tank capacity
Usage time (battery fully
loaded)
Weight (dry)
Symbols
Do not expose to bad weather or moisture (e.g. rain, snow,...).
Do not use in bad weather (wind, rain, snow, storm).
Caution! Risk of injury and/or damage and/or deterioration of product in case of non
compliance to safety requirements
Read the instructions manual
Keep persons (esp. children) and animals away from working area.
Waste of electrical products should not be disposed of with household waste. Please
dispose at recycle facilities. Check with your local authority or recycling authority
Battery disposal: dispose of battery in appropriate collection centre.
For further information, inquire to local authorities.
III. Safety Instructions
IV. Getting Started
Electrical Sprayer
PRP080E / 764246
KF-8L-8
12V 1,3Ah
Model 12V 1.3Ah
Lead/Acid 12V 1.3Ah
Charging time :
- Before 1st use: 3-5 h
- Uses thereafter : 3 h
Model : TN-12V
PRI : 220-240V ~ 50/60Hz
SEC: 12V 600mA
12V 35W 2800-3200min
0.2-0.3MPa (2-3bars)
35°C / 95°F
8 litres
2h
 2.3kg
V. Operation
VI. Maintenance and Storage
Electrical Sprayer
PRP160DER / 764306
KF-16C-11
12V
Model 6-FMD-8.0 (12V 8Ah/20h)
Lead/Acid 12V 8.0Ah
Charging time :
- Before 1st use: 6-8 h
- Uses thereafter : 6 h
Model : TN-12V
PRI : 220-240V ~ 50/60Hz
SEC: 12V
-1
12V 35W 2800-3200min
0.3-0.4MPa (3-4bars)
35°C / 95°F
16 litres
4h
 6kg
8,0Ah
1000mA
-1