Ribimex PR4EN1T432 Manuel D'instructions Et D'utilisation page 21

• Store idle products. When not in use, product should be stored in a dry, high or locked up place,
out of reach of children.
• Unless otherwise indicated in this instruction manual, repairs or replacement of any damaged
part in an authorized service centre is recommended.
• Maintain product with care. Keep product clean for better and safer performance.
• Unless otherwise indicated in this instruction manual, repairs or replacement of any damaged
part in an authorized service centre is recommended.
• Maintain labels and rating plate through the life of service.
• WARNING! The use of any accessory or attachment, other than those recommended in this
instruction manual, may present a risk of injury to persons or animals and may cause damages.
3.2- Additional safety rules for power tool
• Wear appropriate personal protective equipments (PPE) before starting the machine:
- Eye protection
- Hearing protection
- Dust mask
- Safety helmet
- Protective clothing
- Anti-vibration gloves
- Sturdy footwear with a non-slip sole
• Stay alert, watch what you are doing and use common sense when operating a power tool.
• Do not use a power tool while you are tired or under the influence of drugs, alcohol or
medication.
• Do not overreach. Maintain proper footing and balance at all times. Do not operate the
machine while standing on ladder or any other unstable footing.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• Do not override or interrupt or modify any protective and safety devices of the machine.
• Never operate the machine if the On/Off switch is faulty or not functioning.
• Never leave the product running unattended.
• Verifications before use
- Check the integrity of the machine and signs of damage
- Ensure the tool assembly is properly aligned, installed and secured
- Ensure all screws, bolts and knobs are tightened
- Ensure protective and safety devices are properly assembled and in good condition
- Check fuel level
- Check air filter
3.3- Special warnings when using this product
• Only use the product outdoors or in a well-ventilated area. Never start or run the engine in an
enclosed area. The exhaust emissions may contain toxic carbon monoxide (CO), which may
cause serious injury or death.
• Plan your work and allow plenty of time for rest.
• Continual and regular users should monitor closely the condition of their hands and fingers.
Prolong exposure to vibration could result in whitefinger disease (Raynaud's phenomenon) or
carpal tunnel syndrome. If any of the above symptoms appear, seek medical advice
immediately.
• The engine silencer and cylinder become hot and can cause a burn. Do not touch.
• A certain level of noise emission from the machine cannot be avoided. Schedule noisy works
in accordance with local legislation and at specific times (seek advice from your local
municipality).
• DO NOT operate or leave the machine in bad weather nor damp conditions, such as raining,
Page 21 / 52