Publicité
Les langues disponibles
Les langues disponibles
Note: The UB-543, once used, will provide an inflation appropriate to the user.
1. Wrap the cuff around your wrist. Sit comfortably with the cuff at the same level
as your heart and relax.
2. Press the
button. All of the display segments are displayed.
START
3. Select a user from user
Adjust and keep the height of the cuff (with blue light) to the same level as your
heart using the C.P.G. indicator.
Note: If you do not use user selection, wait for the inflation for several seconds.
If you do not use the C.P.G. function, the C.P.G. indicator is not displayed.
4. Zero (0) is displayed blinking briefly. Then the display changes, as
measurement begins. The cuff starts to inflate. It is normal for the cuff
to feel very tight. The measurement starts automatically when
inflation starts, and the
Note: If you wish to stop inflation at any time, press the
5. When the measurement is complete, the device displays readings
( of the systolic and diastolic pressure readings, pulse rate, WHO
classification, IHB/AFib symbol and C.P.G. indicator). While readings
are displayed, the date and time are displayed alternately. The cuff
exhausts the remaining air and completely deflates automatically.
Note: If you do not want to store new readings in memory, press the
button while readings are displayed.
6. Press the
button again to turn the device off. Remove the cuff.
START
Notes: The device is provided with an automatic power shut-off function.
Allow at least one minute between measurements on the same person.
Measurements
and user
using the
SET
(heart mark) blinks.
English 12
button immediately.
User
The C.P .G. indicator: Orange Blue Orange
At heart level
button again.
START
Measurement in progress
All segments
or user
:
button
SET
LOW LEVEL HIGH
Zero display
Inflation is started
Inflating and
Systolic pressure
Diastolic pressure
WHO classification
IHB/AFib symbol
Pulse rate
The C.P .G. indicator
Publicité
