Troubleshooting - Cooke & Lewis CLMIRAG90-C Mode D'emploi

Cooker Hood

Troubleshooting

Fault
Excessive
Vibration
Light on, but fan
does not work.
Both light and fan
do not work.
Suction
performance not
good
CLMIRAG90-C-Cooke & Lewis-IM-GB-FR-01.indb 15
Cause
The Appliance is not hung
properly on the brackets.
The fan blade is damaged. Switch off the appliance.
The fan motor is not fixed
tightly.
The fan blade is jammed.
The motor is damaged.
Light bulb broken.
Power connection loose.
Speed may be too low.
Distance between the
appliance and the cooking
place too large.
Metallic anti-grease filter
is dirty.
Troubleshooting
Solution
Take down the appliance
and check it is properly
fixed.
Repair to be carried out by
qualified service personnel
only.
Replace with a bulb with
correct rating.
Check power supply.
Select a higher speed.
Readjust the distance to:
Gas cookers: 75cm
Electric cookers: 65cm
Clean filters (see Care
and maintenance)
GB IE
15
1/1/12 12:31 AM