Product Functions; Operation - Cooke & Lewis CLMIRAG90-C Mode D'emploi

Cooker Hood

Product functions

This appliance extracts the air of the kitchen to remove the odours
and keep an optimum level of the air quality inside the room, it
also allows you to illuminate the cooking area.
Cooker Hood

Operation

• Switch on the appliance at the switched fused connection unit.
The appliance is ready for operation functions.
Touch control panel
1
This panel is located on the front part of the hood and includes:
To obtain the best results from your cooker hood it is
recommended that you leave it switched on for 15 minutes after
you have finished cooking.
CLMIRAG90-C-Cooke & Lewis-IM-GB-FR-01.indb 11
2 3
Filter cleaning alert indicator/switch (ref. 1). Activated
regularly to alert of the need to clean filters and
deactivated with a single press.
Button for setting the timer of the motor (ref. 2). The
extractor will operate for 5 minutes at the current
speed and 5 minutes at each of the lower speeds until
coming to a complete stop.
Button for the light (ref. 3). Allows the light to be
regulated by pressing and holding down.
On/off button of the motor (ref. 4).
Extractor fan speed - button: speed 1
Extractor fan speed - button: speed 2
Extractor fan speed - button: speed 3
Product Functions
4
1
Operation
5
2 3
1/1/12 12:31 AM
GB IE
11