Ow To Hange The Ettings - ResMed S8 AUTOSET VANTAGE Manuel Utilisateur

When the
backlight turns off after two minutes of inactivity and the Start/Stop key dims.
H C
OW TO
You can change settings on the
When the
(a menu) on the LCD screen in order to view and change the settings for a particular
function.
Your clinician will preset the menu to either a standard view or a detailed view.
See "How to Use the Standard Menu" on page 21 and "How to Use the Detailed
Menu" on page 23 for more information.
H
OW TO ENTER THE MENU SCREENS
When the
you will see the word "menu" in the left-hand corner. To select an
V
ANTAGE
H
OW TO SCROLL THROUGH THE MENU
When you are in the menu, scroll through items by pressing the Up or Down keys.
H
OW TO CHANGE A SETTING OPTION
When you have scrolled to the item you require:
1. Press the Left key (Change).
2. Press the Up or Down keys until you see the setting option that you require.
3. Press the Left key (Apply) to select the setting option.
If you wish to exit without changing the option, press the Right key (Cancel).
H
OW TO EXIT OUT OF A MENU
Press the Right key (Exit). This will take you back to the standby (RAMP or
SETTLING) screen.
H
OW TO EXIT OUT OF AN ITEM WITHIN THE MENU
Press the Right key (Exit).
R
AMP AND
If your clinician has set your
is displayed after the Welcome screen. If your clinician has set your
V
ANTAGE
screen.
18
device is in standby mode all keys remain lit. During therapy, the keypad
S8
S
HANGE THE ETTINGS
S8 A S V
UTO ET ANTAGE
S8 A S V
UTO ET ANTAGE
menu, press the Left key.
S
ETTLING
to AutoSet mode, the SETTLING screen is displayed after the Welcome
S8 A S V
UTO ET ANTAGE
is in standby mode you can display a series of screens
standby (RAMP or SETTLING) screen is displayed
S8 A S V
UTO ET ANTAGE
by using the keypad and LCD.
S8 A
to CPAP mode, the RAMP screen
S8 A
S
UTO ET
S
UTO ET