Replacing The Air Filter; Servicing - ResMed S8 AUTOSET VANTAGE Manuel Utilisateur

R
EPLACING THE
To replace the air filter:
1. Remove the air filter cover at the back of the
2. Remove and discard the old air filter.
3. Insert a new filter with the blue tinted side facing out from the device.
4. Replace the air filter cover.
Inspect the air filter every month to check if it is blocked by dirt or contains holes. With
normal use of an
months (or more often if your device is in a dusty environment).
WARNING
!
Do not wash the air filter. The air filter is not washable or reusable.
•
The air filter cover protects the device in the event of accidental liquid spillage
•
onto the device. Ensure the air filter and air filter cover are fitted at all times.
S
ERVICING
CAUTION
!
Do not attempt to open the S8 AutoSet Vantage case. There are no user
•
serviceable parts inside.
Inspection and repair should only be performed by an authorized agent. Under
•
no circumstances should you attempt to service or repair the flow generator
yourself.
This product (
service center 5 years from the date of manufacture. Prior to this, the device is
intended to provide safe and reliable operation provided that it is operated and
maintained in accordance with the instructions provided by ResMed. Applicable
ResMed warranty details are provided with the device at the time of original supply.
Of course, as with all electrical devices, if any irregularity becomes apparent, you should
exercise caution and have the device inspected by an authorized ResMed service
center.
If you feel that your flow generator is not performing properly, see "Troubleshooting"
on page 35.
32
A F
IR ILTER
S8 A S V
UTO ET ANTAGE
S8 A S V
UTO ET ANTAGE
S8 A
UTO
Air filter cover
, the air filter needs to be replaced every six
) should be inspected by an authorized ResMed
.
S V
ET ANTAGE