Nilfisk Advance SD 130 56201625 Mode D'emploi page 9

TROUBLESHOOTING
SWIRLS ON THE FLOOR AFTER SCRUBBING
• Floor not clean.
• Incorrect solution.
• Area not properly swept - debris in pad or brush.
• Improper pad or brush for the job.
• Moving the machine too fast.
SWIRLS ON THE FLOOR AFTER DRY BUFF-
ING
• Moving the machine too fast.
• Floor finish too soft.
• Area not properly swept - debris in pad or brush.
• Improper pad or brush for the job.
CIRCLES ON THE FLOOR
• Machine standing still while the brush or pad is running.
FLOOR FINISH REMOVED
• Improper pad... too aggressive.
• Solution too strong.
TECHNICAL SPECIFICATIONS (as installed and tested on the unit)
Model
Model Number
Motor
Transmission
Pad/Brush Speed
Pad/Brush Size
Wheels
Cord Length
Base Width
Height w/Handle
Net Weight (w/pad holder)
SD 130
56201625
.50 hp
Dual-Planetary
175 rpm
13" (33 cm)
5" (13 cm)
50' (15 m)
13.5" (34.29 cm)
48" (123 cm)
67lbs (30kg)
MACHINE WOBBLES DURING OPERATION
• Defective pad... one side is more dense than the other.
• Machine left sitting on brush or pad for extended period of time causing
bristles or pad to "take a set".
• Pad not "seated" properly into pad holder bristles.
• Warped block on brush or padholder - replace.
MACHINE DOES NOT RUN
• Check plug for proper connection - on machine and at wall outlet.
• Check building circuit breaker.
• Call for service.
FORM NO. 56041529 - SD 130 - 8